Suche Produkten
Series Ceiling, Wall Mount Bracket kit- Spare
AP Access Point Ceiling Wall Mount Bracket Kit
AP Access Point Ceiling Wall Mount Bracket Kit-spare
or Series Ceiling, Wall Mount Bracket Kit
ONS Air Ramp Baffle for the ANSI Chassis
Mast-mount indoor outdoor antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of MHz. The antenna is omnidirectional and has a nominal gain of 5.2 dBi. It is designed to be mounted on a round mast.
Power Injector for Series
50-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
100-ft ultra-low-loss cable, one RP-TNC plug, one RP-TNC jack
10-ft low-loss cable, one straight N connector, one 90-degree N connector
Ceiling mount omnidirectional antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 3 foot each, with four RP-TNC connectors.
Series Wireless Controller for up to 500 Cisco access points
5 GHz omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet CU Mesh Access Points. It mounts directly to the access point and has no cable attachments.
2.4 GHz, 8 dBi and 5 GHz 8 dBi dual-band directional antenna with three N-type connectors. It can be used with the outdoor access points and has no cable attachments.
2.4 GHz, 4 dBi and 5 GHz 7 dBi dual-band omnidirectional antenna which utilizes an N-type connector. It mounts directly to the access point and has no cable attachments. AIR-ANTVG-N has a gray radome.
5 GHz, 14 dBi directional antenna with two orthogonally polarized ports. Antenna comes with two 30-in. cables terminated in right angle N-type connectors.
Wall-mount, indoor outdoor directional patch antenna. Designed for use with any radio that features an RP-TNC antenna connector. For use in the - to -MHz frequency band. The pigtail cable is plenum rated, 36 in. long.
Power Supply - Series
5-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
Indoor or outdoor wall-mounted 5-GHz patch antenna with three cables terminating in RP-TNC connectors. Designed for use with n access points. The plenum-rated pigtail cables are 36 in. long each.
Wireless Controller with 25 AP Licenses
Single white dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 5 GHz frequency band. It has a 90-degree articulation radius. It can be used with radios that utilize an RP?TNC antenna connector.
20-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
Indoor or outdoor use omnidirectional 5 GHz antenna for use with the Series and the a module (AIR-RM22A). Can be mast or ceiling mounted.