new cisco air api e k9 i 19 with vat id i it4trade

Used Cisco WS-C-E-FWM-K9 I| -19% with VAT-ID I| IT4Trade

Cisco Catalyst E Firewall Security System

New Cisco AIR-ANT I| -19% with VAT-ID I| IT4Trade

Mast-mount outdoor high-gain antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of to MHz. The antenna is omnidirectional and has a nominal gain of 12 dBi. This design uses an elevated center-feed to produce an elevation pattern with very littl

New Cisco AIR-ACC I| -19% with VAT-ID I| IT4Trade

This mount permits the Yagi antenna to be mounted to a flat surface or a mast, and then be adjusted in both horizontal and vertical angles.

New Cisco AIR-APMNTGKIT I| -19% with VAT-ID I| IT4Trade

AP Access Point Ceiling Wall Mount Bracket Kit-spare

New Cisco AIR-PWRINJ3 I| -19% with VAT-ID I| IT4Trade

Power Injector for AG, AG, AG Series

New Cisco AIR-PWRINJ4 I| -19% with VAT-ID I| IT4Trade

Power Injectr AP Series

New Cisco AIR-ANT I| -19% with VAT-ID I| IT4Trade

2.4 Ghz, 21 dBi Solid Dish Antenna w RP-TNC Connector

New Cisco AIR-APMNTGKIT I| -19% with VAT-ID I| IT4Trade

or Series Ceiling, Wall Mount Bracket Kit

New Cisco AIR-ANTP-R I| -19% with VAT-ID I| IT4Trade

Wall-mount indoor outdoor antenna with a RP-TNC connector. Designed for use with any radio that features a RP-TNC connector. For use in the - to -MHz frequency band. The plenum rated pigtail cable is 36 in. long.

New Cisco AIR-ANTP-R I| -19% with VAT-ID I| IT4Trade

Wall-mount diversity patch antenna with RP-TNC connectors. Designed for use in both indoor and outdoor applications. It comes with wall-mount hardware and has a gain of 7 dBi. It has a plenum-rated pigtail cable of 36 in.

New Cisco AIR-ANTS-R I| -19% with VAT-ID I| IT4Trade

Mast mount outdoor sector antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of MHz. The antenna is directional and has a nominal gain of 14 dBi. Its flexible mounting bracket allows for either mast or wall mounting options.

New Cisco AIR-ANTP2M-N= I| -19% with VAT-ID I| IT4Trade

2.4 GHz, 13 dBi directional antenna with two orthogonally polarized ports. Antenna comes with two 30-in. cables terminated in right angle N-type connectors.

New Cisco AIR-ANTNV-R= I| -19% with VAT-ID I| IT4Trade

Ceiling Mount Omni-directional Antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 6 plenum rated pigtail cables, 18 in. each, with 6 RP-TNC connectors.

New Cisco AIR-ANTV-N I| -19% with VAT-ID I| IT4Trade

5 GHz omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet Series Mesh Access Points. It mounts directly to the access point and has no cable attachments.

New Cisco AIR-ANTSDW-R I| -19% with VAT-ID I| IT4Trade

Single white monopole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It does not articulate as the other dipole antennas. It can be used with the and access points.

New Cisco AIR-PWR--AC I| -19% with VAT-ID I| IT4Trade

Series Wireless Controller Redundant AC Power Supply

New Cisco AIR-ANTNV-R= I| -19% with VAT-ID I| IT4Trade

Wall- or mast-mount 2.4-GHz indoor outdoor omnidirectional antenna with three cables terminating in RP-TNC connectors. For use with n access points. The pigtail cables are plenum rated and 36 in. long each.

New Cisco AIR-ANTV-R I| -19% with VAT-ID I| IT4Trade

Ceiling mount indoor antenna with two RP-TNC connectors. Supports diversity antennas in a single package for areas where multipath problems exist. The pigtail cable is plenum rated and 36” long.

New Cisco AIR-ANTDG-R I| -19% with VAT-ID I| IT4Trade

Single gray dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It does not articulate as the other dipole antennas. It can be used with all radios that utilize an RP-TNC antenna connector

New Cisco AIR-ACC245LA-R I| -19% with VAT-ID I| IT4Trade

Supports both 2.4 GHz and 5 GHz operation with RP-TNC connectors. Provides lightning and related energy surges at the antenna from reaching the radio circuitry. A ground ring is included.

New Cisco AIR-ANTDB-R I| -19% with VAT-ID I| IT4Trade

Single black dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 5 GHz frequency band. It has a 90-degree articulation radius. It can be used with radios that utilize an RP?TNC antenna connector.

New Cisco AIR-ANTV4M-R= I| -19% with VAT-ID I| IT4Trade

Indoor outdoor wall or mast mounted dual band omnidirectional antenna with 4 plenum-rated, 36-in. cables and RP-TNC connectors. Designed for use with access points having dual band ports such as , or .

New Cisco AIR-ANTV-R= I| -19% with VAT-ID I| IT4Trade

Ceiling-mount indoor omnidirectional antenna with three cables terminating in RP-TNC connectors. For use with n access points. For use in the - to -MHz frequency band. The pigtail cables are plenum rated and 36 in. long each.

New Cisco AIR-ANTV-N I| -19% with VAT-ID I| IT4Trade

2.4 GHz omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet Series Mesh Access Points. It mounts directly to the access point and has no cable attachments.

New Cisco AIR-CT-RMNT I| -19% with VAT-ID I| IT4Trade

Cisco Wireless Controller Rack Mount Bracket

Kontakt

• ← Zurück
• Weiter →