Suche Produkten
Mast mount outdoor sector antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of MHz. The antenna is directional and has a nominal gain of 14 dBi. Its flexible mounting bracket allows for either mast or wall mounting options.
2.4 GHz, 13 dBi directional antenna with two orthogonally polarized ports. Antenna comes with two 30-in. cables terminated in right angle N-type connectors.
Ceiling Mount Omni-directional Antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 6 plenum rated pigtail cables, 18 in. each, with 6 RP-TNC connectors.
5 GHz omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet Series Mesh Access Points. It mounts directly to the access point and has no cable attachments.
Single white monopole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It does not articulate as the other dipole antennas. It can be used with the and access points.
Series Wireless Controller Redundant AC Power Supply
Wall- or mast-mount 2.4-GHz indoor outdoor omnidirectional antenna with three cables terminating in RP-TNC connectors. For use with n access points. The pigtail cables are plenum rated and 36 in. long each.
Ceiling mount indoor antenna with two RP-TNC connectors. Supports diversity antennas in a single package for areas where multipath problems exist. The pigtail cable is plenum rated and 36” long.
Single gray dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It does not articulate as the other dipole antennas. It can be used with all radios that utilize an RP-TNC antenna connector
Supports both 2.4 GHz and 5 GHz operation with RP-TNC connectors. Provides lightning and related energy surges at the antenna from reaching the radio circuitry. A ground ring is included.
Single black dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 5 GHz frequency band. It has a 90-degree articulation radius. It can be used with radios that utilize an RP?TNC antenna connector.
Indoor outdoor wall or mast mounted dual band omnidirectional antenna with 4 plenum-rated, 36-in. cables and RP-TNC connectors. Designed for use with access points having dual band ports such as , or .
Ceiling-mount indoor omnidirectional antenna with three cables terminating in RP-TNC connectors. For use with n access points. For use in the - to -MHz frequency band. The pigtail cables are plenum rated and 36 in. long each.
2.4 GHz omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet Series Mesh Access Points. It mounts directly to the access point and has no cable attachments.
Cisco Wireless Controller Rack Mount Bracket
Wall-mount indoor outdoor antenna with two RP-TNC connectors. Similar to AIR-ANTP-R, but providing diversity antennas in the same package for areas where multipath problems exist. The pigtail cable is plenum rated and 36 in. long.
Indoor-only ceiling mounted diversity omnidirectional 5 GHz antenna
Single white dipole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage. It has a 90-degree articulation radius and can be used with the access points.
Indoor-only gray, non-articulating dipole like omnidirectional antenna for 5 GHz. It can be used with radios that utilize an RP?TNC antenna connector.
Stackable Ethernet ports, with 350WAC power supply 1 RU, IP Services feature set
Catalyst E, ES, 48-Port SFP+, AC p s
Stackable Ethernet UPOE ports, with WAC power supply 1 RU, IP Services feature set
Nexus TM-E Bundle with 2x QSFP-40G-SR4 8x SFP-10G-SR
Stackable with Mbps Gbps UPOE Ethernet ports, with W AC power supply 1RU, IP Services feature set
Cat E-Series 6-Slot Chassis, fan, no ps