Suche Produkten
Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up
Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20 km. Transmits nm and receives nm optical signal.
Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 40 km. Transmits nm and receives nm optical signal.
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w red latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w gray latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.
Extended Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Reach of up to 2 km on µm MMF and µm MMF. Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w orange latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w blue latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.
Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits nm and receives nm optical signal.
Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical reach of 300m on µm MMF or 550m on µm MMF.
Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works at Mbit s speed and full-duplex mode. Supports Mbit s as well when combined with OS-U24X and OS-U24.
Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.
Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR
Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40 Km on µm SMF.
Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.
Base-T Gigabit industrial ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP supports Mbit s and full-duplex mode.
Industrial grade Gigabit SFP transceiver. Supports single mode fiber, 120 km, nm, LC Connector, Digital Diagnostic Monitoring (DDM), Extended Temperature -C.
Base-LX Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 10 Km on µm SMF.
10 Gigabit direct attached copper cable (3m, SFP+)