new 3rd party sfp gig 47cwd60 c i 19 with vat id i

New 3rd party SFP-GIG-47CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w gray latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-47CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w gray latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-57CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w orange latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-51CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w blue latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-59CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w red latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-EXTND-C I| -19% with VAT-ID I|

Extended Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Reach of up to 2 km on µm MMF and µm MMF. Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.

New 3rd party SFP-10G-GIG-SR-C I| -19% with VAT-ID I|

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR

New 3rd party SFP-GIG-SX-C I| -19% with VAT-ID I| IT4Trade

Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical reach of 300m on µm MMF or 550m on µm MMF.

New 3rd party SFP-GIG-BX-U20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up

New 3rd party SFP-GIG-T-C I| -19% with VAT-ID I| IT4Trade

Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works at Mbit s speed and full-duplex mode. Supports Mbit s as well when combined with OS-U24X and OS-U24.

New 3rd party SFP-10G-GIG-SR-C I| -19% with VAT-ID I|

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR

New 3rd party SFP-GIG-BX-U20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up

New 3rd party SFP-GIG-BX-D40-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 40 km. Transmits nm and receives nm optical signal.

New 3rd party SFP-GIG-BX-D20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20 km. Transmits nm and receives nm optical signal.

New 3rd party SFP-GIG-LH70-C I| -19% with VAT-ID I| IT4Trade

Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.

New 3rd party SFP-GIG-BX-D40-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 40 km. Transmits nm and receives nm optical signal.

New 3rd party SFP-GIG-T-C I| -19% with VAT-ID I| IT4Trade

Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works at Mbit s speed and full-duplex mode. Supports Mbit s as well when combined with OS-U24X and OS-U24.

New 3rd party ISFP-GIG-LH70-C I| -19% with VAT-ID I|

Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.

New 3rd party ISFP-GIG-LH40-C I| -19% with VAT-ID I|

Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40 Km on µm SMF.

New 3rd party ISFP-GIG-LH70-C I| -19% with VAT-ID I|

Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.

New 3rd party ISFP-GIG-EZX-C I| -19% with VAT-ID I| IT4Trade

Industrial grade Gigabit SFP transceiver. Supports single mode fiber, 120 km, nm, LC Connector, Digital Diagnostic Monitoring (DDM), Extended Temperature -C.

New 3rd party ISFP-GIG-BX-D-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits nm and receives nm optical signal.

New 3rd party ISFP-GIG-LX-C I| -19% with VAT-ID I| IT4Trade

Base-LX Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 10 Km on µm SMF.

New 3rd party ISFP-GIG-T-C I| -19% with VAT-ID I| IT4Trade

Base-T Gigabit industrial ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP supports Mbit s and full-duplex mode.

New 3rd party OAW-SFP-TX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-T, RJ45

Kontakt

• Weiter →