new 3rd party sfp 100 bxlc d c i 19 with vat id i

New 3rd party SFP-100-BXLC-D-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal

New 3rd party SFP-100-BXLC-D-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal

New 3rd party SFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal

New 3rd party SFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal

New 3rd party ISFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand

New 3rd party SFP-100-LC-SM40-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party SFP-100-LC-SM40-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party SFP-100-LC-SM15-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

New 3rd party SFP-GIG-59CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w red latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-51CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w blue latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-47CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w gray latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-57CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w orange latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-47CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w gray latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-EXTND-C I| -19% with VAT-ID I|

Extended Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Reach of up to 2 km on µm MMF and µm MMF. Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.

New 3rd party SFP-10G-GIG-SR-C I| -19% with VAT-ID I|

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR

New 3rd party CTP-SFP-1GE-SX-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-SX Gigabit Ethernet Optic Module, CTP

New 3rd party SFP-10G-C3M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (3m, SFP+)

New 3rd party SFP-GIG-SX-C I| -19% with VAT-ID I| IT4Trade

Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical reach of 300m on µm MMF or 550m on µm MMF.

New 3rd party OAW-SFP-SX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-SX, LC Connector

New 3rd party SFP-10G-C3M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (3m, SFP+)

New 3rd party SFP-GIG-BX-U20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up

New 3rd party SFP-GIG-BX-U20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up

New 3rd party SFP-10G-GIG-SR-C I| -19% with VAT-ID I|

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR

New 3rd party SFP-GIG-BX-D40-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 40 km. Transmits nm and receives nm optical signal.

New 3rd party SFP-GIG-T-C I| -19% with VAT-ID I| IT4Trade

Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works at Mbit s speed and full-duplex mode. Supports Mbit s as well when combined with OS-U24X and OS-U24.

Kontakt

• Weiter →