new 3rd party ja c i 19 with vat id i it4trade

New 3rd party SFP-GIG-EXTND-C I| -19% with VAT-ID I|

Extended Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Reach of up to 2 km on µm MMF and µm MMF. Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.

New 3rd party ISFP-GIG-LH70-C I| -19% with VAT-ID I|

Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.

New 3rd party SFP-GIG-47CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w gray latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-59CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w red latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-51CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w blue latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-57CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w orange latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party ISFP-100-SM40-C I| -19% with VAT-ID I|

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party ISFP-100-SM15-C I| -19% with VAT-ID I|

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

New 3rd party ISFP-GIG-LH40-C I| -19% with VAT-ID I|

Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40 Km on µm SMF.

New 3rd party ISFP-GIG-LH70-C I| -19% with VAT-ID I|

Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.

New 3rd party CTP-SFP-1GE-LX-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-LX Gigabit Ethernet Optic Module, CTP

New 3rd party SFP-GIG-BX-U20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up

New 3rd party ISFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand

New 3rd party SFP-100-BXLC-D-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal

New 3rd party SFP-GIG-BX-U20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up

New 3rd party SFP-100-LC-SM40-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party SFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal

New 3rd party SFP-100-LC-SM40-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party SFP-10G-GIG-SR-C I| -19% with VAT-ID I|

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR

New 3rd party SFP-GIG-BX-D40-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 40 km. Transmits nm and receives nm optical signal.

New 3rd party CTP-SFP-1GE-T-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-T Gigabit (Juniper Compatible)

New 3rd party SFP-10G-GIG-SR-C I| -19% with VAT-ID I|

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR

New 3rd party SFP-100-BXLC-D-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal

New 3rd party SFP-100-LC-SM15-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

New 3rd party SFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal

Kontakt

• ← Zurück
• Weiter →