Suche Produkten
10 Gigabit optical transceiver (SFP+). Supports monomode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40Km
100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.
Cisco Catalyst E Firewall Security System
Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR
100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.
Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up
Cisco Catalyst E VPNSM System Bundles
Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20 km. Transmits nm and receives nm optical signal.
Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.
Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works at Mbit s speed and full-duplex mode. Supports Mbit s as well when combined with OS-U24X and OS-U24.
10 Gigabit direct attached copper cable (3m, SFP+)
OmniAccess Wireless SFP - Base-T, RJ45
10 Gigabit direct attached copper cable (7m, SFP plus)
Four channel 40 Gigabit optical transceiver (QSFP+). Supports single mode fiber over nm wavelength. Typical reach 10 km
100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal
Base-LX Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 10 Km on µm SMF.
10 Gigabit direct attached copper cable (1m, SFP+)
Industrial grade Gigabit SFP transceiver. Supports single mode fiber, 120 km, nm, LC Connector, Digital Diagnostic Monitoring (DDM), Extended Temperature -C.
10 Gigabit Ethernet optical transceiver (XFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40 Km on µm SMF.
100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal
Nexus -E, Reversed Airflow (port side intake), LAN Ent L