Suche Produkten
100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.
Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up
Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works at Mbit s speed and full-duplex mode. Supports Mbit s as well when combined with OS-U24X and OS-U24.
Small Form Factor Pluggable Base-SX Gigabit Ethernet Optic Module, CTP
100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand
10 Gigabit direct attached copper cable (3m, SFP+)
Small Form Factor Pluggable Base-T Gigabit (Juniper Compatible)
OmniAccess Wireless SFP - Base-T, RJ45
100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal
Nexus -E, Reversed Airflow (port side intake), LAN Ent L
Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR
Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 40 km. Transmits nm and receives nm optical signal.
Cisco Catalyst E VPNSM System Bundles
10 Gigabit optical transceiver (SFP+). Supports monomode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40Km
10 Gigabit direct attached copper cable (7m, SFP plus)
100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal
Industrial grade Gigabit SFP transceiver. Supports single mode fiber, 120 km, nm, LC Connector, Digital Diagnostic Monitoring (DDM), Extended Temperature -C.
10 Gigabit direct attached copper cable (1m, SFP+)
Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical reach of 300m on µm MMF or 550m on µm MMF.