Suche Produkten
50-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
Wall or Mast Mount Patch Antenna - Designed for use indoors or outdoors, this antenna comes with a wall mount and a plate that adapts to articulating mounting hardware (AIR-ACC), which is sold separately. It has a plenum-rated pigtail cable of 36 in.
Wall-mount, indoor outdoor directional patch antenna. Designed for use with any radio that features an RP-TNC antenna connector. For use in the - to -MHz frequency band. The pigtail cable is plenum rated, 36 in. long.
Wall- or mast-mount 2.4-GHz indoor outdoor patch antenna with three cables terminating in RP-TNC connectors. For use with n access points. The pigtail cables are plenum rated and 36 in. long each.
Indoor or outdoor wall-mounted 5-GHz patch antenna with three cables terminating in RP-TNC connectors. Designed for use with n access points. The plenum-rated pigtail cables are 36 in. long each.
Designed for high density wireless applications such as stadiums and arena. Wall mounted patch antenna with 6 plenum-rated pigtail cables, 36 in. each and 6 RP-TNC connectors. Only certified for use with APP access point.
Ceiling mount omnidirectional antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 3 foot each, with four RP-TNC connectors.
Single white dipole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage. It does not articulate as the other dipole antennas. It can be used with the access points.
5-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
20-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
Single white dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It has a 90-degree articulation radius. It can be used with all radios that utilize an RP?TNC antenna connector.
2.4 GHz omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet Series Mesh Access Points. It mounts directly to the access point and has no cable attachments.
5 GHz omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet Series Mesh Access Points. It mounts directly to the access point and has no cable attachments.
Single Unit antenna Extension Base (10 foot cable included)
Catalyst -X Front-to-Back Cooling Fan
ONS Air Ramp Baffle for the ANSI Chassis
AP Access Point Ceiling Wall Mount Bracket Kit
Mast-mount indoor outdoor antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of MHz. The antenna is omnidirectional and has a nominal gain of 5.2 dBi. It is designed to be mounted on a round mast.
Power Injector for Series
Series Ceiling, Wall Mount Bracket kit- Spare
2.4 GHz, 8 dBi and 5 GHz 8 dBi dual-band directional antenna with three N-type connectors. It can be used with the outdoor access points and has no cable attachments.
Series Wireless Controller for up to 250 Cisco access points
10-ft low-loss cable, one straight N connector, one 90-degree N connector
AIRONET POWER INJECTOR - LR2