Suche Produkten
Indoor-only gray, non-articulating dipole like omnidirectional antenna for 5 GHz. It can be used with radios that utilize an RP?TNC antenna connector.
Supports both 2.4 GHz and 5 GHz operation with RP-TNC connectors. Provides lightning and related energy surges at the antenna from reaching the radio circuitry. A ground ring is included.
5-ft low-loss cable, one RP-TNC plug, one 90-degree N male connector
HP G zl Switch
Catalyst -X 750W AC Front-to-Back Cooling Power Supply
This mount permits the Yagi antenna to be mounted to a flat surface or a mast, and then be adjusted in both horizontal and vertical angles.
Power Injectr AP Series
2.4 Ghz, 21 dBi Solid Dish Antenna w RP-TNC Connector
or Series Ceiling, Wall Mount Bracket Kit
Power Injector for AG, AG, AG Series
AP Access Point Ceiling Wall Mount Bracket Kit-spare
Mast-mount outdoor high-gain antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of to MHz. The antenna is omnidirectional and has a nominal gain of 12 dBi. This design uses an elevated center-feed to produce an elevation pattern with very littl
Ceiling mount omnidirectional antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 3 foot each, with four RP-TNC connectors.
Single white dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 5 GHz frequency band. It has a 90-degree articulation radius. It can be used with radios that utilize an RP?TNC antenna connector.
Designed for high density wireless applications such as stadiums and arena. Wall mounted patch antenna with 6 plenum-rated pigtail cables, 36 in. each and 6 RP-TNC connectors. Only certified for use with APP access point.
Single white dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It has a 90-degree articulation radius. It can be used with all radios that utilize an RP?TNC antenna connector.
Single white dipole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage. It does not articulate as the other dipole antennas. It can be used with the access points.
5-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
Wall- or mast-mount 2.4-GHz indoor outdoor patch antenna with three cables terminating in RP-TNC connectors. For use with n access points. The pigtail cables are plenum rated and 36 in. long each.
Wall or Mast Mount Patch Antenna - Designed for use indoors or outdoors, this antenna comes with a wall mount and a plate that adapts to articulating mounting hardware (AIR-ACC), which is sold separately. It has a plenum-rated pigtail cable of 36 in.
20-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
50-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
100-ft ultra-low-loss cable, one RP-TNC plug, one RP-TNC jack
Indoor or outdoor wall-mounted 5-GHz patch antenna with three cables terminating in RP-TNC connectors. Designed for use with n access points. The plenum-rated pigtail cables are 36 in. long each.