Suche Produkten
Single white dipole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage. It has a 90-degree articulation radius and can be used with the access points.
Indoor outdoor wall or mast mounted dual band omnidirectional antenna with 4 plenum-rated, 36-in. cables and RP-TNC connectors. Designed for use with access points having dual band ports such as , or .
Wall-mount diversity patch antenna with RP-TNC connectors. Designed for use in both indoor and outdoor applications. It comes with wall-mount hardware and has a gain of 7 dBi. It has a plenum-rated pigtail cable of 36 in.
5-ft low-loss cable, one RP-TNC plug, one 90-degree N male connector
Catalyst -X 750W AC Front-to-Back Cooling Power Supply
Power Injectr AP Series
Power Injector for AG, AG, AG Series
This mount permits the Yagi antenna to be mounted to a flat surface or a mast, and then be adjusted in both horizontal and vertical angles.
Mast-mount outdoor high-gain antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of to MHz. The antenna is omnidirectional and has a nominal gain of 12 dBi. This design uses an elevated center-feed to produce an elevation pattern with very littl
or Series Ceiling, Wall Mount Bracket Kit
2.4 Ghz, 21 dBi Solid Dish Antenna w RP-TNC Connector
AP Access Point Ceiling Wall Mount Bracket Kit-spare
Ceiling mount omnidirectional antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 3 foot each, with four RP-TNC connectors.
Designed for high density wireless applications such as stadiums and arena. Wall mounted patch antenna with 6 plenum-rated pigtail cables, 36 in. each and 6 RP-TNC connectors. Only certified for use with APP access point.
Wall-mount, indoor outdoor directional patch antenna. Designed for use with any radio that features an RP-TNC antenna connector. For use in the - to -MHz frequency band. The pigtail cable is plenum rated, 36 in. long.
Single white dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It has a 90-degree articulation radius. It can be used with all radios that utilize an RP?TNC antenna connector.
Indoor or outdoor wall-mounted 5-GHz patch antenna with three cables terminating in RP-TNC connectors. Designed for use with n access points. The plenum-rated pigtail cables are 36 in. long each.
50-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
100-ft ultra-low-loss cable, one RP-TNC plug, one RP-TNC jack
5-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
20-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
Single white dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 5 GHz frequency band. It has a 90-degree articulation radius. It can be used with radios that utilize an RP?TNC antenna connector.
Single white dipole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage. It does not articulate as the other dipole antennas. It can be used with the access points.
Wall- or mast-mount 2.4-GHz indoor outdoor patch antenna with three cables terminating in RP-TNC connectors. For use with n access points. The pigtail cables are plenum rated and 36 in. long each.
Wall or Mast Mount Patch Antenna - Designed for use indoors or outdoors, this antenna comes with a wall mount and a plate that adapts to articulating mounting hardware (AIR-ACC), which is sold separately. It has a plenum-rated pigtail cable of 36 in.