new 3rd party sfp gig extnd c i 19 with vat id i

New 3rd party ISFP-GIG-BX-D-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits nm and receives nm optical signal.

New 3rd party ISFP-GIG-T-C I| -19% with VAT-ID I| IT4Trade

Base-T Gigabit industrial ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP supports Mbit s and full-duplex mode.

New 3rd party ISFP-GIG-LX-C I| -19% with VAT-ID I| IT4Trade

Base-LX Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 10 Km on µm SMF.

New 3rd party ISFP-GIG-EZX-C I| -19% with VAT-ID I| IT4Trade

Industrial grade Gigabit SFP transceiver. Supports single mode fiber, 120 km, nm, LC Connector, Digital Diagnostic Monitoring (DDM), Extended Temperature -C.

New 3rd party CTP-SFP-1GE-T-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-T Gigabit (Juniper Compatible)

New 3rd party SFP-10G-ER-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit optical transceiver (SFP+). Supports monomode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40Km

New 3rd party SFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal

New 3rd party SFP-100-LC-SM40-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party OAW-SFP-LX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-LX, LC Connector

New 3rd party SFP-10G-C3M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (3m, SFP+)

New 3rd party SFP-10G-C7M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (7m, SFP plus)

New 3rd party SFP-10G-C7M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (7m, SFP plus)

New 3rd party SFP-10G-ER-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit optical transceiver (SFP+). Supports monomode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40Km

New 3rd party SFP-100-BXLC-D-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal

New 3rd party SFP-100-LC-SM15-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

New 3rd party SFP-100-LC-SM40-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party SFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal

New 3rd party OAW-SFP-TX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-T, RJ45

New 3rd party OAW-SFP-TX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-T, RJ45

New 3rd party SFP-10G-C3M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (3m, SFP+)

New 3rd party OAW-SFP-SX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-SX, LC Connector

New 3rd party SFP-100-BXLC-D-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal

New 3rd party CTP-SFP-1GE-SX-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-SX Gigabit Ethernet Optic Module, CTP

New 3rd party CTP-SFP-1GE-LX-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-LX Gigabit Ethernet Optic Module, CTP

New 3rd party SFP-10G-C1M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (1m, SFP+)

Kontakt

• ← Zurück
• Weiter →