Gigabyte GA EX58-UD4P Intel I G.Skill 8 GB RAM
Biete hier ein Komplettset bestehend aus Mainboard + Blende: Gigabyte GA EX58-UD4P CPU + Intel Kühler: I RAM: G.Skill 8 Gb Ram Wie auf dem letzten Bild zu sehen ist, hatte ich das System angeschlossen und mit Windows 10 gestartet. Komponenten funktionieren soweit tadellos und können direkt verwendet werden. Mainboard Spezifikationen: Prozessor Support for an Intel® Core™ i7 series processor in the LGA package (Go to CPU Support List for the latest CPU support) L3 cache varies with CPU QPI 4.8GT/s / 6.4GT/s Chipsatz North Bridge: Intel® X58 Express Chipset South Bridge: Intel® ICH10R Arbeitsspeicher 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory (Note 1) Dual/3 channel memory architecture Support for DDR MHz memory modules (Go to Memory Support List for the latest memory support list.) Audio Realtek ALC889A codec High Definition Audio -channel Support for Dolby® Home Theater Support for S/PDIF In/Out Support for CD In LAN 1 x Realtek D chips ( Mbit) Erweiterungssteckplätze 2 x PCI Express x16 slots, running at x16 (PCIEX16_1/PCIEX16_2) (Note 2) 1 x PCI Express x8 slot, running at x8 (PCIEX8_1) (Note 3) (The PCIEX16_1, PCIE16_2 and PCIEX8_1 slots support 2-Way/3-Way NVIDIA SLI/ATI CrossFireX technology and conform to PCI Express 2.0 standard.) 1 x PCI Express x4 slot 1 x PCI Express x1 slot 2 x PCI slots Storage Interface South Bridge: 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10 GIGABYTE SATA2 chip: 1 x IDE connector supporting ATA- and up to 2 IDE devices 2x SATA 3Gb/s connectors (GSATA2_0, GSATA2_1) supporting up to 2 SATA 3Gb/s devices Support for SATA RAID 0, RAID 1 and JBOD iTE IT chip: 1 x floppy disk drive connector supporting up to 1 floppy disk drive USB Integrated in the South Bridge Up to 12 USB ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers) IEEE T.I. TSB43AB23 chip Up to 3 IEEE a ports (1 on the back panel, 2 via the IEEE a brackets connected to the internal IEEE a headers) Interne I/O Anschlüsse 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x floppy disk drive connector 1 x IDE connector 8 x SATA 3Gb/s connectors 1 x CPU fan header 3 x system fan headers 1 x power fan header 1 x North Bridge fan header 1 x front panel header 1 x front panel audio header 1 x CD In connector 1 x S/PDIF In header 1 x S/PDIF Out header 2 x USB headers 2 x IEEE a headers 1 x power LED header 1 x chassis intrusion header 1 x power switch 1 x reset switch Rückseite I/O Panel 1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x coaxial S/PDIF Out connector 1 x optical S/PDIF Out connector 1 x IEEE a port 1 x clearing CMOS switch 8 x USB ports 1 x RJ-45 ports 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone) I/O iTE IT chip H/W Überwachung System voltage detection CPU/System/North Bridge temperature detection CPU/System/Power fan speed detection CPU overheating warning CPU/System/Power fan fail warning CPU/System fan speed control (Note 4) BIOS 2 x 8 Mbit flash Use of licensed AWARD BIOS Support for DualBIOS™ PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b CPU Spezifikationen: Leistung Anzahl der Kerne 4 Anzahl der Threads 8 Grundtaktfrequenz des Prozessors 2,66 GHz Max. Turbo-Taktfrequenz 2,93 GHz Cache 8 MB SmartCache Bustaktfrequenz 4,8 GT/s QPI Anzahl der QPI-Links 1 Verlustleistung (TDP) 130 W VID-Spannungsbereich V-V RAM Spezifikationen: G.Skill Ripjaws FCL10D - 8 Gigabyte Bei Fragen einfach melden!
