asus tablet with transformer keyboard bronze 3rd party os

New 3rd party SFP-GIG-LH70-C I| -19% with VAT-ID I| IT4Trade

Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.

New 3rd party SD-X45-2GB-E I| -19% with VAT-ID I| IT4Trade

Cisco Catalyst -GB SD card

New 3rd party SFP-GIG-SX-C I| -19% with VAT-ID I| IT4Trade

Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical reach of 300m on µm MMF or 550m on µm MMF.

New 3rd party CTP-SFP-1GE-T-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-T Gigabit (Juniper Compatible)

New 3rd party SFP-10G-C3M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (3m, SFP+)

New 3rd party OAW-SFP-SX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-SX, LC Connector

New 3rd party OAW-SFP-TX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-T, RJ45

New 3rd party SFP-GIG-BX-D40-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 40 km. Transmits nm and receives nm optical signal.

New 3rd party CTP-SFP-1GE-SX-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-SX Gigabit Ethernet Optic Module, CTP

New 3rd party SFP-10G-ER-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit optical transceiver (SFP+). Supports monomode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40Km

New 3rd party SFP-GIG-T-C I| -19% with VAT-ID I| IT4Trade

Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works at Mbit s speed and full-duplex mode. Supports Mbit s as well when combined with OS-U24X and OS-U24.

New 3rd party SFP-10G-C7M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (7m, SFP plus)

New 3rd party EX-SFP-1FE-FX I| -19% with VAT-ID I| IT4Trade

Small Form Factor Pluggable 100Base-FX Fast Ethernet Optics

New 3rd party SFP-10G-GIG-SR-C I| -19% with VAT-ID I|

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR

New 3rd party SFP-GIG-BX-U20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up

New 3rd party OAW-SFP-LX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-LX, LC Connector

New 3rd party ISFP-GIG-T-C I| -19% with VAT-ID I| IT4Trade

Base-T Gigabit industrial ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP supports Mbit s and full-duplex mode.

New 3rd party ISFP-GIG-BX-D-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits nm and receives nm optical signal.

New 3rd party SFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal

New 3rd party SFP-GIG-BX-D40-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 40 km. Transmits nm and receives nm optical signal.

New 3rd party SFP-100-LC-SM40-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party SFP-100-BXLC-D-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal

New 3rd party EX-QSFP-40GE-DAC-50CM-C I| -19% with VAT-ID I|

compatible QSFP+ to QSFP+ 40 Gigabit Ethernet Direct Attach Copper (twinax copper cable) 50cm Passive

New 3rd party CF-UPG1-1G-S-C I| -19% with VAT-ID I| IT4Trade

Juniper compatilbe Compact Flash Upgrade Kit for RE-A-,RE-A- and RE-S-

New 3rd party CF-UPG2-1G-S-C I| -19% with VAT-ID I| IT4Trade

Upgrade Kit 1G compact flash upgrade for RE

Kontakt

• ← Zurück
• Weiter →