Suche Produkten
10-ft low-loss cable, one straight N connector, one 90-degree N connector
Wireless Controller with 15 AP Licenses
Wall-mount, indoor outdoor directional patch antenna. Designed for use with any radio that features an RP-TNC antenna connector. For use in the - to -MHz frequency band. The pigtail cable is plenum rated, 36 in. long.
20-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
2.4 GHz, 8 dBi and 5 GHz 8 dBi dual-band directional antenna with three N-type connectors. It can be used with the outdoor access points and has no cable attachments.
Series Wireless Controller for up to 250 Cisco access points
Power Supply - Series
Wireless Controller with 25 AP Licenses
Supports both 2.4 GHz and 5 GHz operation with N-Type connectors. Provides lightning and related energy surges at the antenna from reaching the radio circuitry. A ground ring is included.
2.4 GHz, 13 dBi and 5 GHz 13 dBi dual-band directional antenna with four(4) N-type connectors. It is outdoor rated and has no cable attachments.
Series Wireless Controller for up to 500 Cisco access points
2.4 GHz, 4 dBi and 5 GHz 7 dBi dual-band omnidirectional antenna which utilizes an N-type connector. It mounts directly to the access point and has no cable attachments. AIR-ANTVG-N has a gray radome.
Wall or Mast Mount Patch Antenna - Designed for use indoors or outdoors, this antenna comes with a wall mount and a plate that adapts to articulating mounting hardware (AIR-ACC), which is sold separately. It has a plenum-rated pigtail cable of 36 in.
Series WLAN Controller AC Power Supply (redundant)
Single white dipole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage. It does not articulate as the other dipole antennas. It can be used with the access points.
Ceiling mount omnidirectional antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 3 foot each, with four RP-TNC connectors.
AIRONET POWER INJECTOR - LR2
A 7.5 dBi antenna which supports MHz. It has a 12-in. pigtail cable and anN-type connector.
Single white dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It has a 90-degree articulation radius. It can be used with all radios that utilize an RP?TNC antenna connector.
50-ft low-loss cable, one RP-TNC plug, one RP?TNC jack
Wall- or mast-mount 2.4-GHz indoor outdoor patch antenna with three cables terminating in RP-TNC connectors. For use with n access points. The pigtail cables are plenum rated and 36 in. long each.
5 GHz, 14 dBi directional antenna with two orthogonally polarized ports. Antenna comes with two 30-in. cables terminated in right angle N-type connectors.
Indoor or outdoor use omnidirectional 5 GHz antenna for use with the Series and the a module (AIR-RM22A). Can be mast or ceiling mounted.