Suche Produkten
Indoor-only gray, non-articulating dipole like omnidirectional antenna for 5 GHz. It can be used with radios that utilize an RP?TNC antenna connector.
Wall-mount indoor outdoor antenna with two RP-TNC connectors. Similar to AIR-ANTP-R, but providing diversity antennas in the same package for areas where multipath problems exist. The pigtail cable is plenum rated and 36 in. long.
Single black dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 5 GHz frequency band. It has a 90-degree articulation radius. It can be used with radios that utilize an RP?TNC antenna connector.
Ceiling-mount indoor omnidirectional antenna with three cables terminating in RP-TNC connectors. For use with n access points. For use in the - to -MHz frequency band. The pigtail cables are plenum rated and 36 in. long each.
Wall-mount diversity patch antenna with RP-TNC connectors. Designed for use in both indoor and outdoor applications. It comes with wall-mount hardware and has a gain of 7 dBi. It has a plenum-rated pigtail cable of 36 in.
Single white dipole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage. It has a 90-degree articulation radius and can be used with the access points.
Supports both 2.4 GHz and 5 GHz operation with RP-TNC connectors. Provides lightning and related energy surges at the antenna from reaching the radio circuitry. A ground ring is included.
Ceiling Mount Omni-directional Antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 6 plenum rated pigtail cables, 18 in. each, with 6 RP-TNC connectors.
Single gray dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It does not articulate as the other dipole antennas. It can be used with all radios that utilize an RP-TNC antenna connector
Single white monopole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It does not articulate as the other dipole antennas. It can be used with the and access points.
Ceiling mount indoor antenna with two RP-TNC connectors. Supports diversity antennas in a single package for areas where multipath problems exist. The pigtail cable is plenum rated and 36” long.
Wall- or mast-mount 2.4-GHz indoor outdoor omnidirectional antenna with three cables terminating in RP-TNC connectors. For use with n access points. The pigtail cables are plenum rated and 36 in. long each.
5-ft low-loss cable, one RP-TNC plug, one 90-degree N male connector
Catalyst -X 750W AC Front-to-Back Cooling Power Supply
SRX services gateway 100 with 8xFE ports and high memory (1GB RAM, 1GB FLASH) External power supply and cord included.
48-port BASE-T (48 PoE ports) + 930 W AC PSU
8-port 10GbE SFP+ line card; requires SFP+ optics sold separately
SRX services gateway 240 with 16 x GE ports, 4xmini-PIM slots, and base memory (512MB RAM, 1GB FLASH). Integrated power supply with power cord. 19 Rack mount kit included.
48-port BASE-T (8 PoE ports) + 320 W AC PSU
SRX services gateway 210 with 2xGE + 6xFE ports, 1xmini-PIM
SRX services gateway 210 Enhanced with faster CPU, 2xGE + 6xFE ports, 1xmini-PIM slot, and 1GB RAM, 1GB FLASH. External Power supply and power cord included.
SRX services gateway 240 with 16 x GE ports, 4xmini-PIM slots, and high memory (2 GB DRAM, 2 GB FLASH). Integrated power supply with power cord. 19 Rack mount kit incl.
SRX services gateway 100 with 8xFE ports and base memory
24-port BASE-T (24 PoE ports) 600 W AC PSU