Suche Produkten
ASA Service Module for Catalyst -E, 3DES AES
Firewall blade for and , VFW License Separate
E-Delivery DCNM for SAN Advanced Edition for N5K
g Configurable Radio Module for AP AP. FCC Cnf
Cisco G ETSI; CCM CCME UL Reqd; Battery PS Not Included
Cisco G ETSI, CM CME UL Reqd, Battery PS Not Included
Cisco Catalyst E Firewall Security System
Cisco Catalyst E VPNSM System Bundles
This mount permits the Yagi antenna to be mounted to a flat surface or a mast, and then be adjusted in both horizontal and vertical angles.
AP Access Point Ceiling Wall Mount Bracket Kit-spare
Power Injectr AP Series
Mast-mount outdoor high-gain antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of to MHz. The antenna is omnidirectional and has a nominal gain of 12 dBi. This design uses an elevated center-feed to produce an elevation pattern with very littl
2.4 Ghz, 21 dBi Solid Dish Antenna w RP-TNC Connector
or Series Ceiling, Wall Mount Bracket Kit
Power Injector for AG, AG, AG Series
Single gray dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It does not articulate as the other dipole antennas. It can be used with all radios that utilize an RP-TNC antenna connector
2.4 GHz, 13 dBi directional antenna with two orthogonally polarized ports. Antenna comes with two 30-in. cables terminated in right angle N-type connectors.
Cisco Wireless Controller Rack Mount Bracket
Supports both 2.4 GHz and 5 GHz operation with RP-TNC connectors. Provides lightning and related energy surges at the antenna from reaching the radio circuitry. A ground ring is included.
Wall-mount indoor outdoor antenna with a RP-TNC connector. Designed for use with any radio that features a RP-TNC connector. For use in the - to -MHz frequency band. The plenum rated pigtail cable is 36 in. long.
Mast mount outdoor sector antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of MHz. The antenna is directional and has a nominal gain of 14 dBi. Its flexible mounting bracket allows for either mast or wall mounting options.
Ceiling Mount Omni-directional Antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 6 plenum rated pigtail cables, 18 in. each, with 6 RP-TNC connectors.