new cisco air antp2m n i 19 with vat id i it4trade

New Cisco AIR-ANTV-R= I| -19% with VAT-ID I| IT4Trade

Ceiling-mount indoor omnidirectional antenna with three cables terminating in RP-TNC connectors. For use with n access points. For use in the - to -MHz frequency band. The pigtail cables are plenum rated and 36 in. long each.

New Cisco AIR-PWR--AC I| -19% with VAT-ID I| IT4Trade

Series Wireless Controller Redundant AC Power Supply

New Cisco AIR-ANTV4M-R= I| -19% with VAT-ID I| IT4Trade

Indoor outdoor wall or mast mounted dual band omnidirectional antenna with 4 plenum-rated, 36-in. cables and RP-TNC connectors. Designed for use with access points having dual band ports such as , or .

New Cisco AIR-CT-K9 I| -19% with VAT-ID I| IT4Trade

Series Wireless Controller for up to 100 Cisco access points

New Cisco AIR-ANTP-R I| -19% with VAT-ID I| IT4Trade

Wall-mount indoor outdoor antenna with two RP-TNC connectors. Similar to AIR-ANTP-R, but providing diversity antennas in the same package for areas where multipath problems exist. The pigtail cable is plenum rated and 36 in. long.

New Cisco AIR-ANTNV-R= I| -19% with VAT-ID I| IT4Trade

Ceiling Mount Omni-directional Antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 6 plenum rated pigtail cables, 18 in. each, with 6 RP-TNC connectors.

New Cisco AIR-ANTDB-R I| -19% with VAT-ID I| IT4Trade

Single black dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 5 GHz frequency band. It has a 90-degree articulation radius. It can be used with radios that utilize an RP?TNC antenna connector.

New Cisco AIR-ACC245LA-R I| -19% with VAT-ID I| IT4Trade

Supports both 2.4 GHz and 5 GHz operation with RP-TNC connectors. Provides lightning and related energy surges at the antenna from reaching the radio circuitry. A ground ring is included.

New Cisco AIR-ANTP-R I| -19% with VAT-ID I| IT4Trade

Wall-mount indoor outdoor antenna with a RP-TNC connector. Designed for use with any radio that features a RP-TNC connector. For use in the - to -MHz frequency band. The plenum rated pigtail cable is 36 in. long.

New Cisco AIR-ANTV-R I| -19% with VAT-ID I| IT4Trade

Indoor-only ceiling mounted diversity omnidirectional 5 GHz antenna

New Cisco AIR-ANTS-R I| -19% with VAT-ID I| IT4Trade

Mast mount outdoor sector antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of MHz. The antenna is directional and has a nominal gain of 14 dBi. Its flexible mounting bracket allows for either mast or wall mounting options.

New Cisco AIR-ANTDG-R I| -19% with VAT-ID I| IT4Trade

Single gray dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It does not articulate as the other dipole antennas. It can be used with all radios that utilize an RP-TNC antenna connector

New Cisco AIR-CT-RMNT I| -19% with VAT-ID I| IT4Trade

Cisco Wireless Controller Rack Mount Bracket

New Cisco AIR-ANTDG-R I| -19% with VAT-ID I| IT4Trade

Indoor-only gray, non-articulating dipole like omnidirectional antenna for 5 GHz. It can be used with radios that utilize an RP?TNC antenna connector.

New Cisco AIR-ANTV-R I| -19% with VAT-ID I| IT4Trade

Ceiling mount indoor antenna with two RP-TNC connectors. Supports diversity antennas in a single package for areas where multipath problems exist. The pigtail cable is plenum rated and 36” long.

New Cisco AIR-ANTNV-R= I| -19% with VAT-ID I| IT4Trade

Wall- or mast-mount 2.4-GHz indoor outdoor omnidirectional antenna with three cables terminating in RP-TNC connectors. For use with n access points. The pigtail cables are plenum rated and 36 in. long each.

New Cisco AIR-ANTSDW-R I| -19% with VAT-ID I| IT4Trade

Single white monopole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It does not articulate as the other dipole antennas. It can be used with the and access points.

Used Cisco AIR-ANTV-N I| -19% with VAT-ID I| IT4Trade

A 7.5 dBi antenna which supports MHz. It has a 12-in. pigtail cable and anN-type connector.

Used Cisco AIR-ACC245LA-N= I| -19% with VAT-ID I| IT4Trade

Supports both 2.4 GHz and 5 GHz operation with N-Type connectors. Provides lightning and related energy surges at the antenna from reaching the radio circuitry. A ground ring is included.

Used Cisco AIR-ANTP4M-N= I| -19% with VAT-ID I| IT4Trade

2.4 GHz, 13 dBi and 5 GHz 13 dBi dual-band directional antenna with four(4) N-type connectors. It is outdoor rated and has no cable attachments.

Used Cisco AIR-ANTV-N I| -19% with VAT-ID I| IT4Trade

5 GHz omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet CU Mesh Access Points. It mounts directly to the access point and has no cable attachments.

Used Cisco AIR-CAB010LL-N I| -19% with VAT-ID I| IT4Trade

10-ft low-loss cable, one straight N connector, one 90-degree N connector

Used Cisco AIR-ANTP3M-N= I| -19% with VAT-ID I| IT4Trade

2.4 GHz, 8 dBi and 5 GHz 8 dBi dual-band directional antenna with three N-type connectors. It can be used with the outdoor access points and has no cable attachments.

Used Cisco AIR-ANTV-N I| -19% with VAT-ID I| IT4Trade

2.4 GHz, 4 dBi and 5 GHz 7 dBi dual-band omnidirectional antenna which utilizes an N-type connector. It mounts directly to the access point and has no cable attachments. AIR-ANTVG-N has a gray radome.

New Cisco AIR-APAG-E-K9 I| -19% with VAT-ID I| IT4Trade

a g Non-modular IOS AP, RP-TNC, ETSI Cnfg

Kontakt

• ← Zurück
• Weiter →