new 3rd party oaw sfp tx c i 19 with vat id i it4trade

New 3rd party SFP-GIG-LH70-C I| -19% with VAT-ID I| IT4Trade

Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.

New 3rd party SFP-10G-C3M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (3m, SFP+)

New 3rd party SFP-10G-C3M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (3m, SFP+)

New 3rd party SFP-10G-C7M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (7m, SFP plus)

New 3rd party SFP-GIG-T-C I| -19% with VAT-ID I| IT4Trade

Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP works at Mbit s speed and full-duplex mode. Supports Mbit s as well when combined with OS-U24X and OS-U24.

New 3rd party SFP-10G-C1M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (1m, SFP+)

New 3rd party CWDM-SFP- I| -19% with VAT-ID I| IT4Trade

Cisco CWDM -nm SFP; Gigabit Ethernet and 1 and 2 Gb Fibre Channel

New 3rd party EX-SFP-1FE-FX I| -19% with VAT-ID I| IT4Trade

Small Form Factor Pluggable 100Base-FX Fast Ethernet Optics

New 3rd party SFP-GIG-57CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w orange latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-51CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w blue latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-47CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w gray latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-59CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w red latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-47CWD60-C I| -19% with VAT-ID I|

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w gray latch. Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on µm SMF.

New 3rd party SFP-GIG-EXTND-C I| -19% with VAT-ID I|

Extended Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Reach of up to 2 km on µm MMF and µm MMF. Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.

New 3rd party SFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal

New 3rd party SFP-10G-GIG-SR-C I| -19% with VAT-ID I|

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR

New 3rd party CTP-SFP-1GE-T-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-T Gigabit (Juniper Compatible)

New 3rd party SFP-100-LC-SM15-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

New 3rd party SFP-GIG-BX-D20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20 km. Transmits nm and receives nm optical signal.

New 3rd party CTP-SFP-1GE-LX-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-LX Gigabit Ethernet Optic Module, CTP

New 3rd party SFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal

New 3rd party SFP-100-LC-SM40-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party SFP-GIG-BX-U20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up

New 3rd party SFP-100-LC-SM40-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party SFP-100-BXLC-D-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal

Kontakt

• ← Zurück
• Weiter →