Gigabyte GA X58A-UD3R (rev. 2.0) Intel I G.Skill 8 GB
Biete hier ein Komplettset bestehend aus Mainboard + Blende: Gigabyte X58A-UD3R (rev. 2.0) CPU + Intel Kühler: I RAM: G.Skill 8 Gb Ram Wie auf dem letzten Bild zu sehen ist, hatte ich das System angeschlossen und mit Windows 10 gestartet. Komponenten funktionieren soweit tadellos und können direkt verwendet werden. Prozessor Support for an Intel® Core™ i7 series processor in the LGA package (Go to GIGABYTE's website for the latest CPU support list.) L3 cache varies with CPU QPI 4.8GT/s, 6.4GT/s Chipsatz North Bridge: Intel® X58 Express Chipset South Bridge: Intel® ICH10R Arbeitsspeicher 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory(Note 1) Dual/3 channel memory architecture Support for DDR MHz memory modules Support for non-ECC memory modules Support for Extreme Memory Profile (XMP) memory modules Audio Realtek ALC889 codec High Definition Audio -channel Support for Dolby® Home Theater Support for S/PDIF In/Out Support for CD In LAN 1 x Realtek RTLE chip ( Mbit) Erweiterungssteckplätze 2 x PCI Express x16 slots, running at x16 (PCIEX16_1/PCIEX16_2) (Note 2) 2 x PCI Express x16 slot, running at x8 (PCIEX8_1/PCIEX8_2) (Note 3) (The PCIEX16_1, PCIEX16_2, PCIEX8_1 and PCIEX8_2 slots conform to PCI Express 2.0 standard.) 2 x PCI Express x1 slots 1 x PCI slot Storage Interface South Bridge: 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10 Marvell chip: 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices Support for SATA RAID 0, and RAID 1 * SATA3 RAID 0 4x and SATA3 2x performance are maximum theoretical values. Actual performance may vary by system configuration. * SATA3 SSDs are not recommended for use in RAID 0 mode on Marvell SE ports. GIGABYTE SATA2 chip: 1 x IDE connector supporting ATA- and up to 2 IDE devices 2 x SATA 3Gb/s connectors (GSATA2_8, GSATA2_9) supporting up to 2 SATA 3Gb/s devices Support for SATA RAID 0, RAID 1, and JBOD JMicron JMB362 chip: 2 x eSATA 3Gb/s connectors (eSATA/USB Combo) on the back panel sup- porting up to 2 SATA 3Gb/s devices Support for SATA RAID 0, RAID 1, and JBOD iTE IT chip: 1 x floppy disk drive connector supporting up to 1 floppy disk drive Multi-Graphics Technology Support for 2-Way/3-Way ATI CrossFireX™/NVIDIA SLI technology USB Integrated in the South Bridge Up to 10 USB ports (6 on the back panel, including 2 eSATA/USB Combo, 4 via the USB brackets connected to the internal USB headers) Up to 2 USB ports on the back panel * USB x performance is a maximum theoretical value. Actual performance may vary by system configuration. IEEE T.I. TSB43AB23 chip Up to 3 IEEE a ports (2 on the back panel, 1 via the IEEE a bracket connected to the internal IEEE a header) Interne I/O Anschlüsse 1 x 24-pin ATX main power connector Connectors 1 x 8-pin ATX 12V power connector 1 x floppy disk drive connector 1 x IDE connector 8 x SATA 3Gb/s connectors 2 x SATA 6Gb/s connectors 1 x CPU fan header 3 x system fan headers 1 x power fan header 1 x North Bridge fan header 1 x front panel header 1 x front panel audio header 1 x CD In connector 1 x S/PDIF In header 1 x S/PDIF Out header 2 x USB headers 1 x IEEE a header Rückseite I/O Panel 1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x coaxial S/PDIF Out connector 1 x optical S/PDIF Out connector 1 x clearing CMOS button 2 x IEEE a ports 4 x USB ports 2 x USB 3.0 ports 2 x eSATA/USB Combo connectors 1 x RJ-45 port 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone) CPU Spezifikationen: Leistung Anzahl der Kerne 4 Anzahl der Threads 8 Grundtaktfrequenz des Prozessors 3,06 GHz Max. Turbo-Takt RAM Spezifikationen: G.Skill Ripjaws FCL10D - 8 Gigabyte Bei Fragen melden!