Antminer D3 15 Gh/s SEPTEMBER BATCH IN HAND
I am selling an antminer D3 Hashrate 15 Gh (17 Gh), W. It is tested and fully functional. I prefer personal handover. But when I pay in advance, I can send it by courier service. Miner is located in the Czech Republic. 1. Specifications of the Antmine D3 are as follows: a) Hash rate: 15 GH/s (Variation of ±5% is expected) b) Power consumption: W (at the wall, with Bitmain s APW3 PSU, 93% efficiency, 25°C ambient temp). c) Dimensions of the miner: mm d) Hashing algorithm: X11 2. Power consumption figures will vary with your PSU\``s efficiency, the ambient operating temperature and the accuracy of the power meter. 3. Bitmain recommends use of the APW3++ PSU with the Antmine D3. One APW3++ PSU can not power more than one Antmine D3. 4.The shipping for this batch is expected to start on a first-order-first-ship basis after 1st November for orders that Bitmain has received full payment for. 5. We advise you to research and prepare in advance for the customs\`` clearance in your country to avoid delays or unexpected costs. 6. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board! 7. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply