cisco wlan series controller air ct k9 v03

Used Cisco AIR-ANTP2M-N= I| -19% with VAT-ID I| IT4Trade

5 GHz, 14 dBi directional antenna with two orthogonally polarized ports. Antenna comes with two 30-in. cables terminated in right angle N-type connectors.

Used Cisco AIR-ANTV-N I| -19% with VAT-ID I| IT4Trade

2.4 GHz, 4 dBi and 5 GHz 7 dBi dual-band omnidirectional antenna which utilizes an N-type connector. It mounts directly to the access point and has no cable attachments. AIR-ANTVG-N has a gray radome.

Used Cisco AIR-ANTP-R I| -19% with VAT-ID I| IT4Trade

Wall or Mast Mount Patch Antenna - Designed for use indoors or outdoors, this antenna comes with a wall mount and a plate that adapts to articulating mounting hardware (AIR-ACC), which is sold separately. It has a plenum-rated pigtail cable of 36 in.

Used Cisco AIR-ANTNP-R= I| -19% with VAT-ID I| IT4Trade

Indoor or outdoor wall-mounted 5-GHz patch antenna with three cables terminating in RP-TNC connectors. Designed for use with n access points. The plenum-rated pigtail cables are 36 in. long each.

New Cisco AIR-ANTV-R I| -19% with VAT-ID I| IT4Trade

Indoor-only ceiling mounted diversity omnidirectional 5 GHz antenna

New Cisco AIR-ANTDW-R I| -19% with VAT-ID I| IT4Trade

Single white dipole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage. It has a 90-degree articulation radius and can be used with the access points.

New Cisco AIR-ANTV-R I| -19% with VAT-ID I| IT4Trade

Ceiling mount indoor antenna with two RP-TNC connectors. Supports diversity antennas in a single package for areas where multipath problems exist. The pigtail cable is plenum rated and 36” long.

Used Cisco AIR-ANTDW-R I| -19% with VAT-ID I| IT4Trade

Single white dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It has a 90-degree articulation radius. It can be used with all radios that utilize an RP?TNC antenna connector.

New Cisco AIR-ANTP2M-N= I| -19% with VAT-ID I| IT4Trade

2.4 GHz, 13 dBi directional antenna with two orthogonally polarized ports. Antenna comes with two 30-in. cables terminated in right angle N-type connectors.

Used Cisco AIR-ANTV-R= I| -19% with VAT-ID I| IT4Trade

Ceiling-mount omnidirectional antenna. Designed for use indoors, this antenna comes with ceiling-mount hardware. It has 4 plenum rated pigtail cables, 18 in. each, with 4 right-angle RP-TNC connectors.

Used Cisco AIR-ANTNP-R= I| -19% with VAT-ID I| IT4Trade

Wall- or mast-mount 2.4-GHz indoor outdoor patch antenna with three cables terminating in RP-TNC connectors. For use with n access points. The pigtail cables are plenum rated and 36 in. long each.

New Cisco AIR-ANTDB-R I| -19% with VAT-ID I| IT4Trade

Single black dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 5 GHz frequency band. It has a 90-degree articulation radius. It can be used with radios that utilize an RP?TNC antenna connector.

Used Cisco AIR-ANTV4C-R= I| -19% with VAT-ID I| IT4Trade

Ceiling mount omnidirectional antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 3 foot each, with four RP-TNC connectors.

New Cisco AIR-ANTS-R I| -19% with VAT-ID I| IT4Trade

Mast mount outdoor sector antenna with a RP-TNC connector. This antenna was designed for WLAN applications for frequencies of MHz. The antenna is directional and has a nominal gain of 14 dBi. Its flexible mounting bracket allows for either mast or wall mounting options.

Used Cisco AIR-PWR--AC I| -19% with VAT-ID I| IT4Trade

Series WLAN Controller AC Power Supply (redundant)

Used Cisco AIR-ANTV-N I| -19% with VAT-ID I| IT4Trade

5 GHz omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet CU Mesh Access Points. It mounts directly to the access point and has no cable attachments.

Used Cisco AIR-ANTP-R I| -19% with VAT-ID I| IT4Trade

Wall-mount, indoor outdoor directional patch antenna. Designed for use with any radio that features an RP-TNC antenna connector. For use in the - to -MHz frequency band. The pigtail cable is plenum rated, 36 in. long.

New Cisco AIR-ANTNV-R= I| -19% with VAT-ID I| IT4Trade

Ceiling Mount Omni-directional Antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 6 plenum rated pigtail cables, 18 in. each, with 6 RP-TNC connectors.

Used Cisco AIR-PWR-SPLY1 I| -19% with VAT-ID I| IT4Trade

Power Supply - Series

New Cisco AIR-ANTP-R I| -19% with VAT-ID I| IT4Trade

Wall-mount indoor outdoor antenna with a RP-TNC connector. Designed for use with any radio that features a RP-TNC connector. For use in the - to -MHz frequency band. The plenum rated pigtail cable is 36 in. long.

Used Cisco AIR-ACC245LA-N= I| -19% with VAT-ID I| IT4Trade

Supports both 2.4 GHz and 5 GHz operation with N-Type connectors. Provides lightning and related energy surges at the antenna from reaching the radio circuitry. A ground ring is included.

New Cisco AIR-ANTSDW-R I| -19% with VAT-ID I| IT4Trade

Single white monopole antenna with RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the MHz frequency band. It does not articulate as the other dipole antennas. It can be used with the and access points.

Used Cisco AIR-CAB100ULL-R I| -19% with VAT-ID I| IT4Trade

100-ft ultra-low-loss cable, one RP-TNC plug, one RP-TNC jack

Used Cisco AIR-ANTNP-R= I| -19% with VAT-ID I| IT4Trade

Designed for high density wireless applications such as stadiums and arena. Wall mounted patch antenna with 6 plenum-rated pigtail cables, 36 in. each and 6 RP-TNC connectors. Only certified for use with APP access point.

Used Cisco AIR-CAB020LL-R I| -19% with VAT-ID I| IT4Trade

20-ft low-loss cable, one RP-TNC plug, one RP?TNC jack

Kontakt

• ← Zurück
• Weiter →