1 stk edat modul einzelmodul c i

New Cisco N3K-C-BA-L3 I| -19% with VAT-ID I| IT4Trade

Nexus , Rev Airflow (port side intake), AC P S, LAN Ent

Used 3rd party WS-G -C I| -19% with VAT-ID I| IT4Trade

BASE-SX Short Wavelength GBIC (Multimode only)

Used Cisco WS-C-XL-EN I| -19% with VAT-ID I| IT4Trade

12-port switch plus 2 GBIC ports

New 3rd party SFP-GIG-EXTND-C I| -19% with VAT-ID I|

Extended Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Reach of up to 2 km on µm MMF and µm MMF. Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.

New Cisco C-NM-4-1G I| -19% with VAT-ID I| IT4Trade

Cisco Catalyst x 1GE Network Module

Used Cisco CP-CAM-C-K9 I| -19% with VAT-ID I| IT4Trade

Video Cam for Series IP Phone

Used Cisco WS-C-S3-DC I| -19% with VAT-ID I| IT4Trade

Catalyst Chassis(6-Slot),SupIII w 2 GE, 2 DC P S, Fans

New Juniper EX-C-12P-2G I| -19% with VAT-ID I| IT4Trade

EX-C compact, fanless switch with 12-port BaseT (12-ports PoE+) and 2 Dual-Purpose (BaseT or SFP) uplink ports (optics not included)

New 3rd party SFP-100-BXLC-D-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits nm and receives nm optical signal

New 3rd party ISFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand

New 3rd party SFP-GIG-LH70-C I| -19% with VAT-ID I| IT4Trade

Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on µm SMF.

New Cisco N3K-C-E-BA-L3 I| -19% with VAT-ID I| IT4Trade

Nexus -E, Reversed Airflow (port side intake), LAN Ent L

New 3rd party XFP-10G-ER40-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit Ethernet optical transceiver (XFP MSA). Supports single mode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40 Km on µm SMF.

New 3rd party SFP-GIG-BX-D20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20 km. Transmits nm and receives nm optical signal.

New 3rd party SFP-10G-ER-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit optical transceiver (SFP+). Supports monomode fiber over nm wavelength (nominal) with an LC connector. Typical reach of 40Km

New 3rd party SFP-100-LC-SM15-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

New 3rd party OAW-SFP-SX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-SX, LC Connector

New 3rd party SFP-10G-C7M-C I| -19% with VAT-ID I| IT4Trade

10 Gigabit direct attached copper cable (7m, SFP plus)

New 3rd party SFP-10G-GIG-SR-C I| -19% with VAT-ID I|

Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports BaseSX and 10GBASE-SR

New 3rd party CTP-SFP-1GE-SX-C I| -19% with VAT-ID I|

Small Form Factor Pluggable Base-SX Gigabit Ethernet Optic Module, CTP

New 3rd party SFP-100-BXLC-U-C I| -19% with VAT-ID I|

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits nm and receives nm optical signal

New 3rd party SFP-100-LC-SM40-C I| -19% with VAT-ID I|

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

New 3rd party SFP-GIG-BX-U20-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up

New 3rd party ISFP-GIG-BX-D-C I| -19% with VAT-ID I|

Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits nm and receives nm optical signal.

New 3rd party OAW-SFP-TX-C I| -19% with VAT-ID I| IT4Trade

OmniAccess Wireless SFP - Base-T, RJ45

Kontakt

• ← Zurück
• Weiter →